Official Creality PETG 3D Printer Filament 1.75mm 1KG (2.2lbs), High Precision, Strong Toughness, Odorless, Better Flow, Moistureproof 3D Printing CR PETG Filament, Black

This PETG filament by Creality works great! I’ve run several prints with it on my 3D printer and the results have been consistently smooth, strong, and reliable. Layer adhesion is excellent, and it handles overhangs and bridges surprisingly well.It feeds cleanly with no clogs or tangling, and the finish has a nice glossy look that makes prints look sharp right off the bed. I’ve had no issues with stringing or warping, which is a big win when working with PETG.Creality really nailed it with this one. If you’re a PETG fan like me, this filament is a solid choice—great performance and great value. Highly recommend!

I’ve had a great experience using the CR PETG filament. It prints smoothly with minimal stringing and excellent layer adhesion. The quality is consistent throughout the spool, and the results are strong, durable prints with a nice glossy finish. It works well with standard PETG settings and doesn’t warp or clog my nozzle. Great value for the price—this is definitely a filament I’ll be reordering!

Amazing quality filament that comes out looking amazing with bright vibrant colors. I have had no issues with creality filament as of yet. It's a super fair price for the quality and name, it is wound up great and runs smooth with never a hint of a tangle. I bought this box for some 4th of july outdoor decorations that so far have been soaking up sunlight with no damage or sign of UV fading on the parts, so like most petgs it is safe to use outside. And they don't soak up too much heat as I have birdhouses made out of it as well, and they stay surprisingly cool inside even with them out in the sun! Definitely will be purchasing more.

I haven't seen PETG this cheap since before the pandemic. These are definitely quality filament. Accurate dimension. The vacuum bag could be better because mine wasn't really vacuum sealed. As soon as I pulled it out of the box the bag was loose. There was definitely a hole in the bag somewhere. Anyway, nothing a filament dryer can't fix. It prints very smoothly. No stringing, extremely smooth top surface (I don't iron my top layer), and nice glossy walls. Well worth every penny.

Color was black. Printed terribly out of the vacuum sealed packaging. Dried for 12+ hours and it got better, but still seems sub-par. This is with a Creality K1 max printer and stock CR-PETG profile.Good deal, but not sure if I will buy this again. I had a pack that I got free with my printer that did great. Something is off here. Dry your filament.Updated the review. After drying, the filament printed very well at high speeds. So a good deal but you have issues dry it.

This was my first time buying and using PETG filament. I have read that many people have issue with PETG filament being wet and causing problems during printing, and that it may need to be dried before using it. I had none of these issues using the filament straight out of the package. The only thing I experienced was some very slight stringing on a few prints that cleaned up easily and made no noticeable impact on the final print. I used the Bambulab P1S with the Bambu PETG Basic default setting for all my prints which seemed to be about perfect. I like the quality of the filament and the results it produced and I think this filament is a great value for the money. I have already purchased a couple more rolls of this filament.

I just received a brand new Creality K2 Plus printer, so instead of using the tried and true PETG that I've been using Successfully for 2 years, I opted to order this 'Creality' brand PETG instead.. Same company, it should work.. Right?!Nope!! Not even close!!1 black roll / 1 gray roll. Both placed in the new SUNLU quad roll dryer - Set for PEGT - Left to run until done drying..Print 1: Fails miserably.. Not enough heat to liquify properly, delamination, skipping, etc..*This is where I 'assumed' that it was 'User Error' on My part.. So I keep re-doing / re-setting, etc. Same Thing.. FAILURES TO PRINT..I finally figure it out - IT'S THE FILAMENT'S FAULT! It wasn't 'wound' onto the spool . . . it looked more like 'BRADED'!The line twisted onder and over line several rows over from it, knotting up, binding, jamming the printer's extruder..*This lead to a few nuclear melt downs, having to keep disassembling the extruder, clean out nuked tips, etc...Onto Roll Two: Gray roll, load, extru . . . extru . . . NOPE! NO EXTRUDE . . . The stuff wouldn't melt properly..What?!?!Again . . . NEW PRINTER, so I assume this has to me Me or the Printer! NOPE!Laser-Thermometer readings don't lie. Everything on the machine end Was Correct And Hot..I had to max out the tip temp, get it to melt in manually, but then it Wouldn't Retract..*This nonsense repeats on an endless loop before finally working . . well . . for 3/4 of a print . . Then FAILED..Yet again, it stopped melting, jammed the tip, and splooged out all over the hex-section of the nozzle..C'Mon!!So at this point, I go to cut the line at the spool, and Go Figure . . . the line is all knotted up in a bird-nest AGAIN.TWO ROLLS Back To Back - Different Colors, so, Different Batches.. Not Cool. [3 previously used brands work fine!!]*I initially intended on contacting the seller directly, but Amazon decided to make that harder to do/find, so, I guess we'll just rant about it here.HEADS UP!! [As Of Right Now] . . . ***AVOID!! -- NOT RECOMMENDED!!****I'll update IF/WHEN this issue is addressed/corrected

Great filament! Picked this PETG up to print some modifications for my Ender 3 V3 Plus and it’s been great! Zero printing issues and the pieces I’ve printed are holding strong! Will be purchasing more to print some accessories for the shop as well!