LINKUP - AVA5 PCIE 5.0 Riser Cable | RTX5090 RX9070 GPU Ready | x16 128GB/s Speed | Compatible with PCIe 4.0 & WRX80/WRX90E | Right Angle, Black 20cm (Total Length 24cm)

No issues, seeing same benchmarks with my 5090 Astral LC OC with this riser cable as I did with the card straight into the PCI-E 5.0 slot. No stability issues. Testing now for over a month.

The media could not be loaded. Very good quality riser cable and works excellently with my 5080 at the advertised pcie gen 5 speed. It just managed to fit in my lian li a4-h2o with maybe 1mm of clearance as shown in my video. I wouldn't recommend buying at full price of £100, bought mine for £55 used (like new) which i assume is open box, but i have seen it as low as £65 new so unless you have a 5090 it's not going to increase performance (1% faster for the 5090 vs gen 4) since a 5080 (like mine) can be fine at pcie gen 3 speeds.

Cable Delivered and installed. With no issues switched to Gen5 16x. (Old Gen4 Linkup cable was only working at gen4 8x with 5090. Not sure why as with 3080 it was working full gen4 x16 for around 4 years.)

Bought to use the riser fitment in my case, and it works well. No issues with speed, and is compatible with PCI 5.0 when I need it.My only issues are it's a little expensive, and one end of the PCI socket took several attempts to fit as it just kept slipping away from the screw.Apart from that it does its job.

Pleasantly surprised by the quality of this, wanted a white one to match the colour of the case but it'll be behind the card anyway. Previously had a pop at supplier for delivery but that was due to Amazon messaging me that I would have to wait another 3 days so again Pleasantly surprised that it turned up the following morning, like I said fantastic quality

Its expensive but its worth it. If u have new gpus like rtx 5070 and onwards i strongly recommend getting this. I tried couple of pcie riser cable between 50£ to 80£ but all had issues, stuttering , random blue screens. But then i decided to buy this and the speed is ridiculous fast. I was about to give up on itx build after couple of failed riser cable but this just saved me.

Cable is so badly made that the housing for the slot actually split when inserting the video card. No reinforcement and the slot itself on the female end is flexible to the extent that you can bend it with mild pressure from your fingers. No lock mech either on the female end, which is a terrible omission. The plastic used is so cheap that it cannot withstand the pressure of the card insertion and splits rather than grip the board edge. There's also a distinct lack of flex in the cable itself, more plastic than rubber making it brittle also. Do not buy this brand of cable under any circumstances, possibly the worst I have ever seen in 30 years of building PCs! Genuinely a terrible effort.

The media could not be loaded. Works perfect. Gen 5 PCIe speeds on and Auros RTX 5080 Waterforce. Installed in a Fractal Meshify 2 case.Very happy!