Alpine Corporation TEC106-BZ 35” Tall 3-Tier Pedestal Water Fountain with Birdbath in Vintage – Outdoor Garden Fountain for Yard, Patio, Deck Decoration, Bronze

Very easy to install, it works great and sounds nice.

Photo wouldn’t upload but I wanted to say the patina on this plastic bath is very convincing. It worried me as I put it together but taking a step back was all I needed to do and the illusion of metal and patina kicked in. Assembly was simple. Bath is light. My patio is small and bath will be seen close up; still very nice. Recommend.

A lot of items that are made in China are very good quality. This the exception. Very difficult. The holes in the pump cover, big dish, small dish were all way to small to fit over the housing shaft and had to be reamed out using a drill and reamer. . The shaft top nut was strupped and had to be cut off and a new one I bought installed. The threaded top cover had a issue also the threads in the cap were stripped. Had to use a thread chaser to use this cap. Three sheet metal screws and three washers were supplied with no instructions how to use them. I did figure that out. It attaches the pump to the base large dish. It would not start pumping as it blew a circuit breaker when plugged in. Tried to (as the instructions states) carefully grio the impeller and gently pull it out. Good luck on that. I gave up on that and spun the impeller in place and got it to pump. The cord is very stiff and difficult to instsall the pump in the base of the big dish.Very poor engineering, as when nothing fits what does someone do, In my case being a mechanic I coould make it work.Assembly time 1 hour, tools needed, Electric drill, reamer, phillips and straight blade screw drivers. Needle nose pliers, hand wrench and adjustable plier. Do not buy this unless you must reverse engineer it. I should of returned it, but knowing what I see, what I would get back would be the same.AMAZON, stop shipping this JUNK!

The media could not be loaded. I purchased this birdbath/fountain primarily for my hummingbirds after doing research and finding that the bubbler type of fountains appeal more to the hummingbirds than the types of fountains that spray. This had everything that I wanted and at an affordable price. It sits on my front porch near my hummingbird feeder. Because it is on the porch, which is level ground, having the birdbath/fountain level should not have been an issue, however, the basin on mine does not sit level on its post, even though everything is screwed in correctly, so I had to put something underneath the base on one side to level the basin so that the water would flow correctly. A portion of the pump cord that is attached to the pump is sealed within the basin, and it appears to be longer than needed, so the length of the cord within the basin made it difficult to maneuver and attach the pump securely to the pump housing during setup, but I got it done. After I got everything put together and leveled I added some rocks to the main basin for added weight and to help the smaller birds. Once everything was set up it is working beautifully. It's only been set up for 3 days, and so far only a male cardinal has visited it for a drink of water, but I know it's just a matter of time before the other birds and the hummingbirds find it. I took off one star just because of the difficulty with attaching the pump to the pump housing and because I needed to add something to make it level. But otherwise, I am very pleased with my purchase and would recommend it.

I REALLY WANTED THIS LITTLE FOUNTAIN. When it arrived I was actually shocked at how pretty it was. It is a Hard type of plastic, but from across the yard it does look like metal or cement. So It is very nice looking.The only issue was the final installation of the top two parts.I absolutely COULD NOT GET IT TO LINE UP CORRECTLY ...So when it was all put together, it kinda looked like the Leaning Tower of Pisa.I was actually Ok w/it, because again... I REALLY WANTED IT TO WORK. But when my Hubby saw it, he said, "OMG, THAT LOOKS AWFUL & CHEAP, GET RID OF IT!"Ugghhhh.. So when I looked at it, it did look pretty pitiful. I sadly returned it.Another thing to consider is that YOU MUST KEEP FILLING IT WITH WATER. Here in California, where I live, IT IS VERY HOT, THE SUN WAS DRINKING UP ALL THE WATER.So I think that even IF I had kept it, the fact that I would need to be adding water to it, 2 to 3 times a day would get old fast. IF IT'S NOT CONSTANTLY RUNNING WITH FULL WATER YOU WILL BLOW OUT THE LITTLE WATER PUMP.

It's really pretty and works great! I put it on a patio block on my deck outside. I did have to put a shim under one side just a bit as it was a little lopsided...maybe my deck is crooked...LOL Otherwise good purchase. Thank You

This Birdbath looks very nice and sounds wonderful! I went with the copper to match my outdoor aesthetic. It was easy to assemble and the pump works well! My birdies drink it up every day cause we do live in the Texas heat.It is not the most stable product but some added glue on the base-shaft 1-shaft 2 and extra base weight it’s holding well! I did not add glue to the top pieces cause I will be removing them occasionally to clean and didn’t want the glue to get anywhere near the water to protect the birds. Unfortunately the tops lean but some added dirt at the base, alongside some slight twisting the water falls perfectly.All in All I recommend this product if you want a nice looking inexpensive easy to clean and assemble/move BirdBath

Pump died after 10 month. Half a year of seasonal use. Not going to replace it with this brand.